Canon Laser Class 810 Basic Operation Manual Download Page 167

Page: 167 / 412

4-71

Send

ng Documents

Setting Up and Using the Optional Stamp Feature

If the optonal stamp feature s provded on your machne, you can set the machne to
stamp the front, lower center of every page you scan for sendng.

Setting Up the Stamp Action

Follow ths procedure to set up the stamp acton when the stamp feature s turned ON.

If you are usng the LASER CLASS 830, ths settng s enabled when sendng to a fax, I-fax, e-mal, or fle server
destnaton.

Press [Additional Functions].

Press [

] or [

] to select <TX/RX SETTINGS>, then press [OK].

Press [

] or [

] to select <FAX SETTINGS>, then press [OK].

Summary of Contents for Laser Class 810





























































































































































































































































































































































































































Search results

Summary of Contents for Laser Class 810

Reviews:

Canon Laser Class 810, Basic Operation Manual, Page: 167 / 412

Search results

Summary of Contents for Laser Class 810

Reviews: