Canon L360, User Manual

Page: 346 / 374

Country-specific
Features
Appendix D Country-specific Features
D-9
New Zealand
Caution
1. This equipment may not necessarily provide for the effective hand-
over of a call to or from a telephone connected to the same line.
2. The operation of this equipment on the same line as telephone or
other equipment with audible warning devices or automatic ring
detectors will give rise to bell tinkle or noise and may cause false
tripping of the ring detector. Should such problems occur, the user is
not to contact Telecom faults service.
3. Should this equipment become physically damaged, disconnect
immediately from the Telecom connection and power source and
contact your nearest service agent.
4. To relocate this equipment please.
1) Disconnect the equipment from the Telecom connection.
2) Disconnect the equipment from the power source.
3) Reconnect the equipment to the power source.
4) Reconnect the equipment to the Telecom connection.
5. If the supply cord of this equipment is damaged, it must be replaced
by the special cord (Parts No.: HH2-1910).
6. Not all standard telephones will respond to incoming ringing when
connected to the extension socket.
7. This device may be subject to bell tinkle, or mistakenly enter receive
mode when calls are made from another device on the same line. If
this occurs, the problem should not be referred to the Telecom Faults
service.
8. Please note when you connect an extension phone to this device, if
you use an extension phone which has features such as “last number
redial”, redial memory numbers may be lost.