Canon L360, User Manual

Page: 305 / 374

15-10
The Menu System Chapter 15
RX SETTINGS
For details on accessing the settings below, see page 15-9.
The selectable settings and the default settings vary depending on the country where
you have purchased the FAX. The values shown here are average values.
For the default settings for your FAX, see Appendix C.
Setting Description Sub-Settings
1.ECM RX Enables/disables Error Correction Mode (ECM) during
reception. ON
OFF
2.RX MODE Selects the receive mode (See Chapter 7.).
If you select FAX/TEL AUTO SW, you can select additional
sub-settings (See page 7-5.). FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
3.INCOMING RING When the RX MODE setting is set to FAX ONLY MODE or
FAX/TEL AUTO SW, this setting enables/disables ringing when
the FAX receives a call.** OFF
ON
RING COUNT Selects the number of rings before the FAX begins receiving. 2 TIMES (1 to 99)
4.MAN/AUTO
SWITCH When the receive mode is set to MANUAL MODE, this setting
determines if the FAX switches to fax receive mode after it
rings for a specified time. OFF
ON
F/T RING TIME If you select ON above, this setting selects the length of time
the FAX rings before switching to fax receive mode. 15 SEC (1 to 99)
5.REMOTE RX Enables/disables remote receiving. ON
OFF
REMOTE RX ID If you select ON above, this setting selects the remote
receiving ID. 25 (00 to 99)
6.MEMORY RX Enables/disables reception of a document in the FAX’s
memory when a problem occurs during reception. ON
OFF
7.RX PAGE FOOTER Enables/disables printing of the reception date and time, page
number, and transaction number
(TX/RX NO.) at the bottom of each received fax page.
OFF
ON
* This setting is available for certain countries only.
** Even if you have set INCOMING RING to ON, the FAX-L360 will only ring if you have
connected the optional handset or an extension telephone.