Canon L360, User Manual

Page: 299 / 374

15-4
The Menu System Chapter 15
USER SETTINGS
For details on accessing the settings below, see page 15-3.
The selectable settings and the default settings vary depending on the country where
you have purchased the FAX. The values shown here are average values.
For the default settings for your FAX, see Appendix C.
Setting Description Sub-Settings
1.DATE & TIME Sets the current date and time (See page 3-9.). –
2.UNIT
TELEPHONE #
Enters the fax/telephone number you want to appear
at the top of each fax page you send (See page 3-10.). –
3.UNIT NAME Enters the name or company name you want to appear at the
top of each fax page you send (See page 3-10.). –
4.TX TERMINAL ID Enables/disables printing of the sender information
(See page 3-8.). ON
OFF
TTI POSITION Selects whether the sender information is positioned inside or
outside the image area (See page 3-8.). OUTSIDE IMAGE
INSIDE IMAGE
TELEPHONE #
MARK Selects the prefix for the unit number (See page 3-8.). FAX
TEL
5.SCAN CONTRAST Selects the scanning contrast (See page 6-14.). STANDARD
DARKER
LIGHTER
6.OFFHOOK
ALARM
Enables/disables the off hook alarm that alerts you
that the handset is not seated properly in its cradle. ON
OFF
7.VOLUME
CONTROL
Sets the volume of the FAX sounds. –
CALLING VOLUME Selects the ring volume when the FAX detects a voice call. 1/2/3
KEYPAD VOLUME Selects the keypad touch beep volume. 0 (off)/1/2/3
ALARM VOLUME Selects the error alarm volume. 0 (off)/1/2/3
LINE MONITOR
VOL Selects the line monitor volume (sound during dialling). 0 (off)/1/2/3
8.RX CALL LEVEL Selects the ring type for incoming calls. HIGH
STANDARD
9.TEL LINE TYPE Selects the telephone line type setting for your FAX
(See page 3-12.). TOUCH TONE
ROTARY PULSE
10.R-KEY SETTING Enables dialling through a switchboard.
If you select PBX, you can select additional sub-settings
(See page 10-2.).
PSTN
PBX