Canon Ixus 285 HS Page 83 User Manual Download

Page: 83 / 157

Before Use

Basic Guide

Advanced Guide

Playback Mode

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

P Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Review the edited movie.

●

Press the [ ][ ] buttons to choose [ ],

and then press the [ ] button. The edited

movie is now played.

●

To edit the movie again, repeat step 2.

●

To cancel editing, press the [ ][ ]

buttons to choose [ ]. Press the [ ]

button, press the [ ][ ] buttons to choose

[OK], and then press the [ ] button

again.

Save the edited movie.

●

Press the [ ][ ] buttons to choose [ ],

and then press the [ ] button.

●

Press the [ ][ ][ ][ ] buttons to choose

[New File], and then press the [ ] button.

●

The movie is now saved as a new file.

●

To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be
erased.

●

If the memory card lacks sufficient space, only [Overwrite] will be
available.

●

Movies may not be saved if the battery pack runs out while saving
is in progress.

●

When editing movies, you should use a fully charged battery
pack.

Editing Digest Movies

Still Images

Movies

Individual chapters (clips) (

30) recorded in [

] mode can be

erased, as needed. Be careful when erasing clips, because they cannot

be recovered.

Select the clip to erase.

●

Follow steps 1 – 2 in “Viewing Short

Movies Created When Shooting Still

Images (Digest Movies)” (

66) to

play a movie created in [

] mode, and

then press the [ ] button to access the

movie control panel.

●

Press the [ ][ ] buttons to choose [ ] or

[ ], and then press the [ ] button.

Choose [ ].

●

Press the [ ][ ] buttons to choose [ ],

and then press the [ ] button.

●

The selected clip is played back

repeatedly.

Confirm erasure.

●

Press the [ ][ ] buttons to choose [OK],

and then press the [ ] button.

●

The clip is erased, and the short movie is

overwritten.

●

[ ] is not displayed if you select a clip when the camera is
connected to a printer.

Summary of Contents for Ixus 285 HS






























































































































































Search results

Summary of Contents for Ixus 285 HS

Reviews:

Related manuals for Ixus 285 HS

Brands by name

Popular brands

Canon Ixus 285 HS, User Manual

Search results

Summary of Contents for Ixus 285 HS

Reviews:

Related manuals for Ixus 285 HS

Brands by name

Popular brands