manualshive.com logo in svg

Canon Ixus 285 HS, User Manual, Page: 28 / 157

Share
Download
Canon Ixus 285 HS User Manual Download Page 28

28

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode /  

Hybrid Auto Mode

Other Shooting Modes

P Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Shooting with Camera-Determined 

Settings

For fully automatic selection of the optimal settings for specific scenes, 

simply let the camera determine the subject and shooting conditions.

Shooting (Smart Auto)

 Still Images 

 Movies

1 

Turn the camera on.

 

●

Press the power button.

 

●

The startup screen is displayed.

2 

Enter [

] mode.

 

●

Set the mode switch to [ ].

 

●

Press the [ ] button, press the [ ][ ] 

buttons to choose [

], and then press 

the [ ] button again.

 

●

Press the [ ][ ] buttons to choose 

[

], and then press the [ ] button.

 

●

Aim the camera at the subject. The 

camera will make a slight clicking noise 

as it determines the scene.

 

●

Icons representing the scene and 

image stabilization mode are displayed 

in the upper right of the screen 

(

=

 32, 

=

 33).

 

●

Frames displayed around any detected 

subjects indicate that they are in focus.

Auto Mode / 

Hybrid Auto Mode

Convenient mode for easy shots with greater control over shooting

Summary of Contents for Ixus 285 HS






























































































































































Reviews:

No comments