manualshive.com logo in svg

Canon IXUS 275 HS, User Manual, Page: 56 / 162

Share
Download
Canon IXUS 275 HS User Manual Download Page 56

56

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid Auto 

Mode

Other Shooting Modes

P Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

 

●

If the flash fires, your shot may be overexposed. In this case, set 
the flash to [

] and shoot again (

=

 66).

High-Speed Continuous Shooting (High-Speed 

Burst)

 Still Images 

 

Movies

You can shoot a series of shots in rapid succession by holding the shutter 

button all the way down. For details on the continuous shooting speed, 

see “Continuous Shooting Speed” (

=

 158).

1 

Choose [ ].

 

●

Follow steps 1 – 2 in “Specific Scenes” 

(

=

 49) and choose [ ].

2 

Shoot.

 

●

Hold the shutter button all the way down 

to shoot continuously.

 

●

The recording pixel setting is [ ] (2592 x 1944) and cannot be 
changed.

 

●

Focus, image brightness, and color are determined by the first 

shot.

 

●

Shooting may stop momentarily or continuous shooting may slow 
down depending on shooting conditions, camera settings, and the 
zoom position.

 

●

As more shots are taken, shooting may slow down.

Summary of Contents for IXUS 275 HS



































































































































































Reviews:

No comments