Canon IXUS 275 HS User Manual Download Page 39

Page: 39 / 162

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid Auto

Mode

Other Shooting Modes

P Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

●

Shots taken without adding a date stamp can be printed with one
as follows.
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.

Print using printer functions (

133)

Use camera DPOF print settings (

137) to print

Adding a Date Stamp

Still Images

Movies

The camera can add the shooting date to images, in the lower-right

corner.

However, note that date stamps cannot be edited or removed, so confirm

beforehand that the date and time are correct (

19).

Configure the setting.

●

Press the [

] button, choose [Date

Stamp ] on the [ ] tab, and then

choose the desired option (

27).

●

Once the setting is complete, [ ] is

displayed.

Shoot.

●

As you take shots, the camera adds the

shooting date or time to the lower-right

corner of images.

●

To restore the original setting, choose

[Off] in step 1.

●

Date stamps cannot be edited or removed.

Summary of Contents for IXUS 275 HS



































































































































































Search results

Summary of Contents for IXUS 275 HS

Reviews:

Related manuals for IXUS 275 HS

Brands by name

Popular brands

Canon IXUS 275 HS, User Manual

Search results

Summary of Contents for IXUS 275 HS

Reviews:

Related manuals for IXUS 275 HS

Brands by name

Popular brands