Canon IXUS 245 HS User Manual Download Page 85

Page: 85 / 284

FUNC. Menu

Configure commonly used functions through the FUNC. menu as follows.

Note that menu items and options vary depending on the shooting mode

(

266 – 267) or playback mode (

272).

Access the FUNC. menu.

Touch [

Options

Menu Items

Choose a menu item.

Drag the menu up or down to scroll it, or

touch an item to choose it.

You can also scroll the menu by dragging

up or down outside of the menu area.

Touch your chosen menu item again, or

touch its description at right.

Choose an option.

Drag the options up or down to scroll

them, or touch an option to choose it.

You can also scroll the options by

dragging up or down outside of the option

area.

Finish the setup process.

Touch your chosen option again, or touch

[

The screen before you touched [

]

in step 1 is displayed again, showing the

option you configured.

•

To undo any accidental setting changes, you can restore the camera’s

default settings (

220).

•

On the screen in step 2, you can also choose options by touching their

descriptions at right.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands