Canon IXUS 245 HS User Manual Download Page 48

Page: 48 / 284

Registering a Camera Nickname

(First time only)

To start with, register a camera nickname.

This nickname will be displayed on the screen of target devices when

connecting to other devices via wireless LAN.

Access the wireless LAN

screen.

Press the <

> button to turn the camera

on.

Touch [ ].

[ ] will be displayed during single‑image

display. It will not be displayed in index

display.

Enter a nickname.

Touch within the frame and then enter a

nickname (up to 16 letters and numbers)

with the displayed keyboard.

Touch [

], and then touch [OK].

•

When connecting wirelessly with any device other than a computer, a

memory card must be inserted in the camera. Additionally, the memory card

must contain images in order for you to access Web services or connect to a

smartphone or printer wirelessly.

•

To change the camera’s nickname, choose [Wireless LAN Settings] on the

[

] tab, and then choose [Change Device Nickname].

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands