Canon IXUS 245 HS User Manual Download Page 223

Page: 223 / 284

223

Optional Accessories

The following camera accessories are sold separately. Note that availability

varies by area, and some accessories may no longer be available.

Power Supplies

Battery Pack NB-11L

Rechargeable lithium‑ion battery

Battery Charger CB-2LD/CB-2LDE

Charger for Battery Pack NB‑11L

AC Adapter Kit ACK-DC90

For powering the camera using

household power. Recommended when

using the camera over extended periods,

or when connecting the camera to a

printer or computer. Cannot be used to

charge the camera battery.

•

The battery charger and AC adapter kit can be used in areas with

100 – 240 V AC power (50/60 Hz).

•

For power outlets in a different format, use a commercially

available adapter for the plug. Never use an electrical transformer

designed for traveling, which may damage the battery.

Flash Units

High-Power Flash HF-DC2

External flash for illuminating subjects

that are out of range of the built‑in flash.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands