Canon IXUS 245 HS User Manual Download Page 134

Page: 134 / 284

134

Applying Special Effects

•

Using the flash in this mode may cause unexpected results.

•

In some shooting scenes, images may look grainy and colors may

not look as expected.

Still Images

Movies

Shooting with Color Swap

You can replace one image color with another before shooting. Note that

only one color can be replaced.

Choose [

Follow steps 1 – 2 on

124 and

choose [

Access the setting screen.

Touch [ ].

The original image and the Color Swap

image are displayed one after another.

By default, green will be replaced with

gray.

Specify the color to replace.

Position the center frame over the color

to replace, and then touch the frame at

the bottom left of the screen.

The specified color is recorded.

Specify the new color.

Position the center frame over the new

color, and then touch the frame at the

bottom right of the screen.

The specified color is recorded.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands