Canon IXUS 245 HS User Manual Download Page 133

Page: 133 / 284

133

Applying Special Effects

Still Images

Movies

Shooting with Color Accent

Choose a single image color to keep and change other colors to black and

white.

Choose [

Follow steps 1 – 2 on

124 and

choose [

Access the setting screen.

Touch [ ].

The original image and the Color Accent

image are displayed one after another.

By default, green is the color that will be

kept.

Recorded Color

Specify the color.

Position the center frame over the color

to keep, and then touch the frame at the

bottom of the screen.

The specified color is recorded.

Specify the range of colors to

keep.

Touch [

][

] to adjust the range.

To keep only your specified color, choose

a large negative value. To keep colors

similar to your specified color as well,

choose a large positive value.

Touch [

] to return to the shooting

screen.

Shoot.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands