Canon Ixus 240 hs User Manual Download Page 93

Page: 93 / 220

Applying Special Effects

You can replace one image color with another before shooting. Note that only
one color can be replaced.

Choose

Follow steps 1 – 2 on p. 84 and choose

Access the setting screen.

Touch .

The original image and the Color Swap image
are displayed one after another.

By default, green will be replaced with gray.

Specify the color to replace.

Position the center frame over the color to
replace, and then touch the frame at the
bottom left of the screen.

The specified color is recorded.

Specify the new color.

Position the center frame over the new color,
and then touch the frame at the bottom right
of the screen.

The specified color is recorded.

Specify the range of colors to
replace.

Touch

to adjust the range.

To replace only your specified color, choose
a large negative value. To replace colors
similar to your specified color as well, choose
a large positive value.

Touch

to return to the shooting screen.

Shooting with Color Swap

Still Images

Movies

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Brands by name

Popular brands