Canon Ixus 240 hs User Manual Download Page 79

Page: 79 / 220

Grid lines can be displayed on the screen for vertical and horizontal reference
while shooting.

Configure the setting.

Touch

, touch

, choose [Grid

Lines] on the

tab, and then choose [On]

(p. 50).

Once the setting is complete, grid lines are
displayed on the screen.

To restore the original setting, repeat this
process but choose [Off].

You can check the focus by pressing the shutter button halfway to enlarge the
image area in the AF frame.

Configure the setting.

Touch

, touch

, choose [AF-

Point Zoom] on the

tab, and then choose

[On] (p. 50).

Check the focus.

Press the shutter button halfway. The face
detected as the main subject is now
magnified.

To restore the original setting, choose [Off] in
step 1.

Helpful Shooting Features

Displaying Grid Lines

Still Images

Movies

•

Grid lines are not recorded in your shots.

Magnifying the Area in Focus

Still Images

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands