manualshive.com logo in svg

Canon Ixus 240 hs, User Manual

Share
Download
Canon Ixus 240 hs User Manual Download Page 75

75

Change the image aspect ratio (ratio of width to height) as follows.

Configure the setting.

z

Touch 

H

, choose 

 in the menu, and 

choose the desired option (p. 49).

X

Once the setting is complete, the screen 
aspect ratio will be updated.

z

To restore the original setting, repeat this 
process but choose 

.

Image Customization Features

Changing the Aspect Ratio

Still Images

Native aspect ratio of the camera screen, also used for display on widescreen 
HDTVs or similar display devices.

Same aspect ratio as 35 mm film, used for printing images at 5 x 7-inch or postcard 
sizes.

Same aspect ratio as standard televisions or similar display devices, used for 
printing images at 3.5 x 5-inch or A-series sizes.

Square aspect ratio.

•

For full-screen display, choose 

. However, note that printing shots taken in 

this aspect ratio at 3.5 x 5 in. or A-series sizes may leave blank borders, or some 
image areas may not be printed.

•

At aspect ratios other than 

, digital zoom (p. 61) is not available ([Digital 

Zoom] is set to [Off]).

Summary of Contents for Ixus 240 hs





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands