Canon Ixus 240 hs User Manual Download Page 68

Page: 68 / 220

Using Face ID

Register face information.

Aim the camera so that the face of the person
you want to register is inside the gray frame
at the center of the screen.

A white frame on the person’s face indicates
that the face is recognized. Make sure a white
frame is displayed on the face, and then
shoot.

If the face is not recognized, you cannot
register face information.

Save the settings.

After [Register?] is displayed touch [OK].

The [Edit Profile] screen is displayed.

Enter a name.

Touch [Name].

Touch the desired character to input it.

Touch

to move the cursor.

Touch

to enter capital letters.

Touch

to enter numbers or symbols.

Touch

to delete the previous character.

To return to the profile edit screen, touch

Enter a birthday.

Touch [Birthday].

Touch an item to set it.

Touch

to specify the date and time.

When finished, touch

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands