Canon Ixus 240 hs User Manual Download Page 152

Page: 152 / 220

Editing Still Images

152

You can specify a portion of an image to save as a separate image file.

Choose [Trimming].

Touch

, touch

, and choose

[Trimming] on the

tab (p. 50).

Choose an image.

Choose an image after dragging left or right
to browse. Touch [OK].

Adjust the cropping area.

A frame is displayed around the portion of the
image to be cropped.

The original image is shown in the upper left,
and a preview of the image as cropped is
shown in the lower right.

To resize the frame, either touch the lower-
right image or the

controls, or move

the zoom lever left or right.

To move the frame, drag either image.

To change the frame orientation, touch

Faces detected in the image are shown with
gray frames around them (in the upper-left
image), which can be used for cropping.
Switch between frames as needed by
touching .

Touch [New File].

Save as a new image and review.

Follow steps 4 – 5 on p. 151.

Cropping

Cropping Area

Preview of Image

After Cropping

Resolution After Cropping

•

Editing is not possible for images shot at a resolution of

(p. 76) or

resized to

(p. 151).

•

Images supported for cropping will have the same aspect ratio after cropping.

•

Cropped images will have a smaller resolution than uncropped images.

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands