Canon Ixus 240 hs User Manual Download Page 131

Page: 131 / 220

Viewing

131

Play movies.

Touch

to start playback.

Adjust the volume.

Scroll up or down to adjust the volume.

Pause playback.

To pause playback, touch the screen. The
movie control panel is displayed. To resume
playback, touch

After the movie is finished,

is displayed.

To switch images during image display, you can tap the camera gently on the
side, as shown below.

•

To switch to Shooting mode from Playback mode, press the shutter button
halfway.

•

To deactivate Scroll Display, touch

, touch

, choose [Scroll

Display] on the

tab, and then touch

to choose [Off].

•

For playback from the last image viewed, touch

, touch

, choose

[Resume] on the

tab, and then choose [Last seen].

•

To change the transition shown between images, touch

, touch

choose [Transition] on the

tab, and then touch

to choose the effect.

Active Display

Still Images

Movies

Switch to next image

Switch to previous image

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands