manualshive.com logo in svg

Canon Ixus 132, User Manual, Page: 60 / 335

Share
Download
Canon Ixus 132 User Manual Download Page 60

60

ç

 Contents

ç

 Chapter Contents

Shooting Display Options

Press the <

p

> button to view other information on the screen, or 

to hide the information. For details on the information displayed, 

see On-Screen Information (

=

  

297

).

Information is displayed

No information is 

displayed

• 

Screen brightness is automatically increased by the night display 

function when you are shooting under low light, making it easier 

to check how shots are composed. However, on-screen image 

brightness may not match the brightness of your shots. Note that 

any on-screen image distortion or jerky subject motion will not affect 

recorded images.

• 

For playback display options, see Switching Display Modes 

(

=

  

151

).

Summary of Contents for Ixus 132
















































































































































































































































































































































Reviews:

No comments