Canon Ixus 132 User Manual Download Page 202

Page: 202 / 335

202

Contents

Chapter Contents

Connecting to Web Services

Set up the camera to use a variety of Web services as follows.

Adjusting Settings for Using Web Services

From CANON iMAGE GATEWAY

Adjust account settings for the Web services you want to use.

•

A computer is required for Web service settings, starting with

CANON iMAGE GATEWAY.

•

Because CameraWindow is used to adjust settings, be sure to

install it from the included CD-ROM beforehand (

•

For information on countries and regions where CANON iMAGE

GATEWAY is available, visit the Canon website (http://canon.

com/cig).

Register as a CANON

iMAGE GATEWAY

member.

From a computer or other

device connected to the

Internet, access http://canon.

com/cig and visit the CANON

iMAGE GATEWAY site for your

region.

Follow the instructions displayed

to complete member registration

(free of charge).

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Canon Ixus 132, User Manual, Page: 202 / 335

Search results

Summary of Contents for Ixus 132

Reviews: