Canon Ixus 132 User Manual Download Page 104

Page: 104 / 335

104

Contents

Chapter Contents

•

To switch the orientation of the frame to vertical, press the <

buttons in step 2. To move the frame, press the <

> buttons

again. To return the frame to horizontal orientation, press the

> buttons.

•

Holding the camera vertically will change the orientation of the

frame.

•

Movie image quality is [

] at an aspect ratio of [

] and [

] at

an aspect ratio of [

] (

). These quality settings cannot be

changed.

Still Images

Shooting with a Toy Camera Effect

(Toy Camera Effect)

This effect makes images resemble shots from a toy camera by

vignetting (darker, blurred image corners) and changing the overall

color.

Choose [ ].

Follow steps 1 – 2 in “Specific

Scenes” (

) and choose

[ ].

Choose a color tone.

Press the <

> button, press

the <

> buttons to choose

a color tone, and then press the

> button.

A preview is shown of how your

shot will look with the effect

applied.

Shoot.

Summary of Contents for Ixus 132
















































































































































































































































































































































Search results

Summary of Contents for Ixus 132

Reviews:

Canon Ixus 132, User Manual, Page: 104 / 335

Search results

Summary of Contents for Ixus 132

Reviews: