Special Modes for Other Purposes
97
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
Choose .
Follow steps 1 – 2 on p. 82 and choose
,
and then press the
p
button.
Press the
qr
buttons to choose
, and
then press the
m
button.
Compose the shot and press the
shutter button halfway.
Make sure a green frame is displayed around
the face of the person who will wink.
Press the shutter button all the way
down.
The camera now enters shooting standby
mode, and [Wink to take picture] is displayed.
The lamp blinks and the self-timer sound is
played.
Face the camera and wink.
The camera will shoot about two seconds
after detecting a wink by the person whose
face is inside the frame.
To cancel shooting after you have triggered
the self-timer, press the
n
button.
Using the Wink Self-Timer
Still Images
•
If the wink is not detected, wink again slowly and deliberately.
•
Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•
Closing and opening both eyes at once will also be detected as a wink.
•
If winking is not detected, the camera will shoot about 15 seconds later.
•
To change the number of shots, press the
op
buttons after choosing
in
step 1. [Blink Detection] (p. 78) is only available for the final shot.
•
If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
