manualshive.com logo in svg

Canon IXUS 125 HS, Manual

Share
Download
Canon IXUS 125 HS Manual Download Page 153

Editing Still Images

153

You can specify a portion of an image to save as a separate image file.

Choose [Trimming].

Press the 

 button, and then choose 

[Trimming] on the 

 tab (p. 42).

Choose an image.

Press the 

 buttons to choose an image, 

and then press the 

 button.

Adjust the cropping area.

A frame is displayed around the portion of the 
image to be cropped.
The original image is shown in the upper left, 
and a preview of the image as cropped is 
shown in the lower right.
To resize the frame, move the zoom lever.
To move the frame, press the 

 buttons.

To change the frame orientation, press the 

 button.

Press the 

 button.

Save as a new image and review.

Follow steps 4 – 5 on p. 152.

•

Editing is not possible for images saved as 

 in step 3.

•

Images cannot be resized to a higher resolution.

Cropping

Cropping Area

Preview of Image After

Cropping

Resolution After Cropping

Downloaded From camera-usermanual.com

Summary of Contents for IXUS 125 HS





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands