manualshive.com logo in svg

Canon IXUS 115 HS, User Manual

Share
Download
Canon IXUS 115 HS User Manual Download Page 175

Changing Shooting Function Settings

175

Changing the IS-Mode Settings

z

Choose [IS Mode], then press the 

qr

 

buttons to choose an option.

Grid lines will not be recorded on the image.

Continuous

Image stabilization is always on. 
You can confirm the effects 
directly on the display, which 
makes it easier to check the 
composition or focus.
When shooting movies, the 
camera also reduces strong 
camera shake, for example when 
walking (Dynamic mode).

Shoot Only*

Image stabilization is only active 
at the moment of shooting.

Panning*

Image stabilization only counters 
up and down motion. This option 
is recommended for shooting 
objects moving horizontally.

Off

–

* Setting changes to [Continuous] when 

shooting movies.

•

If camera shake is too strong, attach the camera to a tripod. You should 
also set the IS Mode to [Off] when the camera is attached to a tripod.

•

When using [Panning], hold the camera horizontally to shoot. Image 
stabilization does not work when the camera is held vertically.

COP

Y

Summary of Contents for IXUS 115 HS





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands