Canon iR6570 series, Portable Manual

Page: 248 / 320

Chapter 5
5-98
T-5-59
5.5.3 SORTER
5.5.3.1 SORTER List
0009-6361
iR5570 / iR6570
T-5-60
COPIER > FEEDER > OPTION
Sub-item Description Level
SIZE-SW Use it to enable detection of a mix of AB and inch originals.
setting
0: ON (do not detect; default); 1: OFF (detect)
1
LS-DBL Use it to enable/disable ADF high-speed duplex mode.
setting
0: enable (execute high-speed duplex mode; normal mode;
default)
1: disable (do not execute high-speed duplex mode; low-speed
duplex mode)
1
STAMP-SW Use it to indicate the presence/absence of a stamp. (If fitted, set
'1' for STAMP-SW).
setting
0: stamp absent
1: stamp present (default)
1
COPIER > SORTER > OPTION
Sub-item Description Level
BLNK-SW Use it to set the margin width on both sides of a crease when the
saddle stitcher is in use.
setting
0: normal width (5 mm)
1: extra width (10 mm; default)
1
MD-SPRTN Use it to enable/disable accessory-independent mode in the
event of a finisher error.
setting
0: normal (disable accessory-independent mode; default)
1: enable (do not staple or align)
1