Canon iR3245, Troubleshooting Manual

Page: 53 / 300

Main Power and Control Panel Power 1-19
1
Before You Start Using This Machine
Control Panel Power Switch
Press the control panel power switch to cancel the Sleep mode and resume normal machine
operations.
The machine can receive and print documents from a personal computer when it is in the Sleep mode. I-fax and fax
documents can also be received while the machine is in the Sleep mode.
It takes approximately 10 seconds to recover after the Sleep mode is deactivated.
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds for the touch panel display to
be displayed after pressing the control panel power switch.
Shutting Down the Machine
If there are any jobs currently being processed, or a MEAP application is running when the Shutdown
mode is activated, the machine asks you to confirm and cancel any existing jobs, and then access
to the hard disk is restricted. This procedure protects the hard disk from access errors the next time
the machine is turned ON. When the machine shuts down, it also performs an internal cooling down
process, which enables the machine to be shut down safely. Follow the instructions below to safely
shutdown the machine.
If you turn the main power of the machine OFF without following the procedure below,
copies output the next time the machine is turned ON may not be printed correctly. In this
case, printing will return to normal after a certain number of copies are output.
1
Press and hold the control panel power switch for more than three seconds.
If the machine is in the Sleep mode, press the control panel power switch one time to cancel the Sleep
mode, and then press and hold the control panel power switch again for more than three seconds.
The job confirmation screen is displayed.
•
•
•