Canon iR3245, Network Manual

Page: 209 / 288

5
Using
a
NetBIOS
Network
Setting Up a Computer as a File Server 5-15
Setting Up a Computer as a File Server
To send data from the machine to a computer on your network, you need to specify the settings of the
computer for receiving data. You can send data over a NetBIOS network to a Windows or Samba
(UNIX/Linux/Mac OS X) shared folder. This section describes how to configure a shared folder.
Remark
Samba 2.2.8a or later is supported.
Optional equipment is required to send data from the
machine. For the equipment needed, see"Optional
Equipment and System Requirements(p.1-2)."
This section describes only the procedures for setting
up a computer receiving data sent from the machine.
To send data from the machine to a server on the
network, you must enter an address setting from the
control panel. For instructions on how to specify
recipient address settings, see the Sending and
Facsimile Guide.
The following procedures describe a sample shared
folder configuration. Depending on yourenvironment,
the actual configuration procedure may differ.
Acesst 1.0 6251194