Canon iR2422 series, Service Manual

Page: 67 / 308

Chapter 2
2-13
2.2 Unpacking and Installation
2.2.1 Unpacking and Removing the Packaging Materials
0020-4254
1) Unpack the machine and remove vinyl, cushioning materials, and tape.
2) Hold the handles [1] of the machine together with one or more persons and
take it out.
F-2-15
2.2.2 Installing the Drum Unit
0020-4255
1) Open the front cover [1] of the main body.
F-2-16
2) Turn the developer pressure release lever [1] clockwise, and then open the
left door [2] until it stops.
F-2-17
3) Open the packaging bag of the new drum unit, take the new drum out of
it, and then remove packing tape.
F-2-18
4) Holding the protective cover [1] of the new drum unit, place the drum unit
against the iR body.
F-2-19
The maximum weight of this machine is approximately 46.2 kg. Two or
more persons are required to lift the machine.
[1]
[1]
[1]
The left door must be opened fully to prevent the drum from being damaged
while it is inserted into the drum unit.
The drum unit except for Latin America (120V) model and EUR model is
provided with pressure release hooks [1]. Remove them. Drum units for
other regions are not provided with the pressure release hooks.
[2]
[1]
[1]
[1]