Canon iR2318 series, Service Manual, Page: 279 / 308

Chapter 14
14-7
This copier is furnished with a counter, which can be used to gain rough measures of when to replace supplies. The counter set increments by one on counting each
sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).
14.6 Display
14.6.1 Version Display
0022-5242
The table below lists the items of ROM display mode that are supported.
14.6.2 Error Code Display
0022-5243
Indicate the error code on the operation panel.
14.7 Report
14.7.1 Outline
0022-5244
The table below lists the kinds of reports that are supported.
Item Counter Explanation
Total Counter TTL Total counter
COPY Total copy counter
PDL-PRT PDL print counter
REP-PRT Report print counter
2-SIDE Double-sided copy/print counter
SCAN Scan counter
Pick-up Counter C1 Cassette 1 jam counter
C2 Cassette 2 jam counter
C3 Cassette 3 jam counter
C4 Cassette 4 jam counter
MF Manual feed tray pickup total counter
Feeder Counter FEED Feeder pickup total counter
DFOP-CNT ADF open/close hinge counter
Jam Counter TTL Unit total jam count
FEEDER Feeder total jam count
SORTER Finisher total jam count
2-SIDE Duplex unit jam counter
MF Manual feed tray jam counter
C1 Cassette 1 jam counter
C2 Cassette 2 jam counter
C3 Cassette 3 jam counter
C4 Cassette 4 jam counter
MISC counter WST-TNR Waste toner counter
TR-ROLL Transfer roller counter
DV-UNIT-C Developing unit counter
M-PU-RL Manual feed pickup rollercounter
M-SP-PD Manual feed separation pad counter
FX-UNIT Fixing unit counter
Item Explanation
MAIN Displays the version number of the ROM (SYSTEM) mounted on the image
processor PCB.
MAIN2 Displays the version of the ROM (BOOT) mounted on the image processor
PCB.
ECONT Displays the version number of the ROM mounted on the DC controller PCB.
Tray2 Not used.
Tray3 Not used.
Tray4 Not used.
Duplex Not used.
Finisher Displays the version number of the ROM mounted on the finisher controller
PCB.