Canon iR2270 Series, Service Manual

Page: 77 / 1008

Chapter 1
1-45
1.2.3.6
Adjustment and Cleaning
0009-2479
/ iR3530
*Factory default.
***Indicated when appropriate accessories are installed.
T-1-32
1.2.3.7 Report Output
0007-3167
iR2270 / iR2870 / iR3570 / iR4570
*Factory settings.
***If iR4570, iR3570, iR2870, or iR2270, indicated in the presence of a specific accessory (if model F, standard).
T-1-33
center bind position
change** (w/ saddle finisher)
size: A3,11x17/B4/LGL/A4R,LTRR
position: -2.0 mm to +2.0 mm (in 0.35-mm increments)/*0 mm
density correction copy/Box, transmit; 9 sets each (at time of shipment, set to '5')
page print/number of set
prints adjust stamp position
X: -8 mm to +8 mm (in 1-mm increments)/*0 mm
Y: -8 mm to +8 mm (in 1-mm increment)/*0 mm
clean feeder*** Start key
Mode Description
zoom fine-adjust XY independent: -1.0% to +1.0% (in 0.1% increments), *0%
density correction copier/box, transmit (each in 9 steps; at time of shipment, set to '5')
feeder cleaning*** Start key
Mode Description
transmit (setup)*** transmission results report: *only if error/ON/OFF
show transmission original: *ON/OFF
show transmission original for coded PDF: ON/*OFF
communication control report
print automatically at 100 communications:
print at specified time: ON/*OFF
set time: *00:00 to 23:59
separate transmission and reception: ON/*OFF (toggle)
Mode Description