Canon iR2270 Series, Service Manual

Page: 51 / 1008

Chapter 1
1-19
1.1.16 Printing/Transmission Accessories System Configuration
0008-6929
/ iR3530
The configuration is as shown in the following figure:
MEAP function (C boot) ==> no need for memory expansion
MEAP authentication, MEAP application operation
are both possible
MEAP function (P boot) ==>
-When you want to enable only use of
MEAP authentication
no need for memory expansion
If MEAP application is installed, the device
will not operate (E604-0001 is displayed)
-When you want to enable use of MEAP
authentication and MEAP application
operation
need for iR256 MB Expansion RAM-B1
installed
MEAP function (H boot/
N boot) ==> memory expansion needed
without memory expansion, the device will not
operate (E744 is displayed)
MEAP application USB
connection function ==> USB Application Interface Board-D1
Expansion Bus-B1
Security function
(HDD initial
encryption)
==>
USB Application Interface Board-D1
Expansion Bus-B1
iR Security Kit-A2
iR256MB Expansion RAM-B1
Encryption PDF function ==> Univrsal Send Kit -B1
Universal Send PDF Encryption Kit-B1
Searchable PDF function ==> Univrsal Send Kit -B1
Universal Send Searchable PDF Kit-A1
iR256MB Expansion RAM-B1
Encryption PDF function
+
Searchable PDF function ==> Univrsal Send Kit -B1
Universal Send PDF Encryption Kit-B1
Universal Send Searchable PDF Kit-A1
iR256MB Expansion RAM-B1