Canon iR2018i, Reference Manual, Page: 88 / 444

Placing Originals 2-31
2
B
a
s
ic
O
per
at
ion
s
Placing Originals
Place your originals on the platen glass or into the feeder, depending on the size and type of
originals that you want to copy or fax, and the settings that you have programmed.
■
Platen Glass
Place the originals on the platen glass when scanning bound originals, heavy or lightweight originals,
and transparencies.
■
Feeder
Place the originals into the feeder when you want to scan several originals at the same time, and press
(Start). The machine automatically feeds the originals to the scanning area and scans them.
Two-sided originals can also be automatically turned over and scanned as two-sided documents.
Document Sizes
If your machine is the iR2030/iR2025/iR2022i, or if your machine is the iR2018i and you place
your originals into the feeder, the size of the original is automatically detected and the document
is scanned. However, if the output paper in the recipient’s machine is not equal to the scanned
size, the original image may be reduced in size or divided into smaller parts before it is sent.
If you place the original on the platen glass of the iR2018i, or if the machine cannot detect the
size of the original correctly (e.g. nonstandard paper size or a book), specify the size at which
you want to scan the original. (See Chapter 2, “Basic Copying Features,” in the
Copying Guide .)