manualshive.com logo in svg

Canon iR2018i, Reference Manual, Page: 312 / 444

Share
Download
Canon iR2018i Reference Manual Download Page 312

Auto Online/Offline

6-59

6

S

y

ste

m

 M

anag

er

 S

e

tti

ngs

Auto Online/Offline

To use the Network Scan function, the machine must be connected to a network, and must be 
separately switched online to the network. This section explains how to switch the machine 
online and offline to use the Network Scan function.

NOTE

 

For more information on the Network Scan function, see the Color Network ScanGear User’s Guide.

 

Auto Online 

If Auto Online is set to ‘On’, the machine automatically goes online when you press 

 (Scan) 

on the control panel.

NOTE

 

The default setting is ‘Off’.

1

Press  

(Additional 

Functions) 

➞

 [System Settings].

If necessary, see the screen shot in step 1 of “Specifying the System Manager Settings,” on 
p. 6-2.

If the System Manager ID and System Password have been set, enter the System Manager ID 
and System Password using 

 - 

 (numeric keys) 

➞

 press 

 (Log In/Out).

2

Press [

▼

] or [

▲

] until [Auto Online/Offline] appears 

➞

 press [Auto 

Online/Offline].

Summary of Contents for iR2018i





























































































































































































































































































































































































































































Reviews:

No comments