Canon iR2018i Reference Manual Download Page 293

Page: 293 / 444

Restricting the Send Function

6-40

ste

anag

tti

ngs

Restricting the New Address

This mode enables you to restrict the entering of new destinations. When you set Restrict New
Addresses to ‘On’, the following are restricted:

•

Specifying a destination using

(numeric keys).

•

Registering new destinations with New Address on the Send Basic Features screen.

NOTE

The default setting is ‘Off’.

Press

(Additional

Functions)

➞

[System Settings].

If necessary, see the screen shot in step 1 of “Specifying the System Manager Settings,” on
p. 6-2.

If the System Manager ID and System Password have been set, enter the System Manager ID
and System Password using

(numeric keys)

➞

press

(Log In/Out).

Press [

▼

] or [

▲

] until [Restrict the Send Function] appears

➞

press

[Restrict the Send Function].

Select [Restrict New Addresses]

Summary of Contents for iR2018i





























































































































































































































































































































































































































































Search results

Summary of Contents for iR2018i

Reviews:

Canon iR2018i, Reference Manual, Page: 293 / 444

Search results

Summary of Contents for iR2018i

Reviews: