Canon iR2018i Reference Manual Download Page 272

Page: 272 / 444

Department ID Management

6-19

ste

anag

tti

ngs

Erasing the Department ID and Password

You can erase the Department ID and password that you have registered.

NOTE

If Department ID Management is activated through the optional Card Reader-E1, you cannot delete the
Department ID.

Press

(Additional Functions)

➞

[System Settings]

➞

[Department ID Management].

If necessary, see the screen shot in step 1 of “Registering the Department ID, Password, and
Page Limit,” on p. 6-7.

If the System Manager ID and System Password have been set, enter the System Manager ID
and System Password using

(numeric keys)

➞

press

(Log In/Out).

NOTE

If the desired setting is not displayed, press [

▼

] or [

▲

] to scroll to the desired setting.

Press [On]

➞

[Register ID/Password].

If necessary, see the screen shot in step 2 of “Changing the Password and Page Limit,” on
p. 6-14.

Summary of Contents for iR2018i





























































































































































































































































































































































































































































Search results

Summary of Contents for iR2018i

Reviews:

Canon iR2018i, Reference Manual, Page: 272 / 444

Search results

Summary of Contents for iR2018i

Reviews: