Canon iR2018 Series, Portable Manual, Page: 67 / 122

Chapter 5
55
5.1.13 Download (DOWNLOAD)
5.1.13.1 Download
0017-6182
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading"
section):
Main unit
- Flash ROM ( boot) mounted on the image processor PCB
Accessory
- ROM mounted on the finisher controller PCB
- ROM mounted on the PCL board
5.1.14 Data Initialization Mode (CLEAR)
5.1.14.1 Clear
0017-6183
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
5.1.15 Error Display (ERROR DISPLAY)
5.1.15.1 Error Display
0017-8542
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
An error code is displayed when a service error has occurred. The E code is displayed in the upper step, and the detail code is displayed the bottom step.
Group Item Explanation
TEL & USER DATA Clears all user-registered and -set areas of telephone registration data and user data.
(Telephone registration refers to the registration of codes on one-touch dialing,
abbreviated dialing, and group dialing.)
SERVICE DATA Clears the system dump list, except for counters and clear dates.
COUNTER Clears the maintenance counter, parts counter and mode-specific counters.
Initializes the counter (numerator) in the system dump list.
TYPE Initializes user data and service data to suit specified destination settings.
SOFT-CNT Not used
HST ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
ENVIROMENT Initializes the enviroment log data.
CARD Clears department management information held in the controller before the card
reader is demounted.
ERR E355 Not used
E719 Clears card reader errors.
PWD Clears the system administrator's password.
FILE SYSTEM*1 Delete unnecessary language files in the USB memory.
FORMAT*1 USB MEMORY Format the USB memory. (This mode is used when the USB memory error is damaged
and E744 occurs.)
LICENSE
DRIVE Not used
CA-KEY Initializes an installed CA certification.
ERDS-DAT The settings related to e-RDS are cleared to the factory settings.
ALL Clears user and service data (except for some scan parameters and print parameters),
and the counter setting/registration data in the system dump list, except for the print
count.
*1 Only for the touch panel model.