manualshive.com logo in svg

Canon iR2018 Series, Portable Manual, Page: 23 / 122

Share
Download
Canon iR2018 Series Portable Manual Download Page 23

Chapter 3

11

T-3-5

3.2.5 Jam Codes (Related to Inner 2-way Tray)

0017-6042

iR2022i / iR2025 / iR2030 / iR2018  / iR2022 / iR2018i

T-3-6

Code

Name

Sensor No.

Description

0120

Delay jam at duplex paper sensor 1

SR1002

The duplex paper sensor 1 does not turn on within the specified time after the delivery 
sensor on the main unit side turns on.

0124

Delay jam at duplex paper sensor 2

SR1003

The duplex paper sensor 2 does not turn on within the specified time after the duplex 
reverse motor starts.

0221

Stationary jam at duplex paper sensor 1

SR1002

- The duplex paper sensor 1 does not turn off when the specified time has lapsed since 
the duplex paper sensor 2 turned on.

- The duplex paper sensor 1 does not turn off when the paper with a longitudinal length 
of 280 mm reaches the standby position (about 90 mm from the duplex paper sensor 2). 

0228

Stationary jam at duplex paper sensor 2

SR1003

The duplex paper sensor 2 does not turn off when the specified time has lapsed since 
the feed motor started.

Code

Name

Sensor No.

Description

010e

Delay jam at No.2 delivery section

SR1101

The No.2 delivery sensor does not detect presence of paper within the specified time after turning 
on of the fixing delivery sensor. 

0212

Stationary jam at No.2 delivery section

SR1101

Absence of paper is not detected within the specified time after turning on of the No.2 delivery 
sensor. 

Summary of Contents for iR2018 Series



























































































































Reviews:

No comments