manualshive.com logo in svg

Canon iR2018 Series, Portable Manual, Page: 117 / 122

Share
Download
Canon iR2018 Series Portable Manual Download Page 117

Chapter 8

97

Chapter 8  Upgrading

8.1 Upgrading

8.1.1 Overview of Upgrade (LCD type)

0017-6002

iR2018  / iR2022

This machine and options can be upgraded by downloading system software programs from the personal computer (hereafter called as the PC) in which a service
support tool (hereafter called SST) has been loaded.
System software programs and upgrade tools are listed in the following table:

T-8-1

Pay attention to the following points when updagrading.
1. When updagrading Boot, make sure to update Boot first.
2. When updagrading the following software, make sure to update all to the same version. 
- System
- PCL

8.1.2 Overview of Upgrade (Touch panel type)

0017-6004

iR2022i / iR2025 / iR2030 / iR2018i

Type

System software type 

Upgrade tool  Remarks

SST

Main unit

System (main controller)

Yes

The main controller also controls 
the reader.

Boot (boot program)

Yes

Option

PCL (PCL printer kit-V1)

Yes

Fin_U2 (Finisher-U2)

Yes

Dedicated service tool 
(Downloader PCB: FY9-2034)

Summary of Contents for iR2018 Series



























































































































Reviews:

No comments