SERVICE BULLETIN
COPIER
Issued by Canon Europa N.V.
MODEL:
iR1210, iR1230, iR1270F
No.:
iR1200S-001
(FF-T01-L6-000043-01)
Date:
27.09.02
LOCATION:
READER DRIVE ASSEMBLY
SUBJECT:
CHANGE OF SHAPES OF MEMBER PARTS
Reason :
Measure for noise
Outline :
The gear pulley overlapping the idler gear has a depression on the flange due to
molding. If the shaft leans, and consequently the idler gear is lifted, the idler gear
might come into contact with the depression on the flange, resulting in noise. As
a measure for it, round ribs are added to the top and under surfaces of the 45T
gear (FU3-0076) and to the under surface of the 37T pulley/16T gear
(FU3-0075).
Rib of FU3-0075-020 Ribs of FU3-0076-020
Be sure to replace the 45T gear (FU3-0076) and the 37T pulley/16T gear
(FU3-0075) at the same time. Upon replacement of these member parts, if you
find the countermeasure mylar, which was a temporary measure, be sure to
remove it.
