Canon iR C3200 Series, Service Manual

Page: 983 / 1216

Chapter 17
17-3
0003 A short circuit of the temperature
detecting thermistor inside the non-
contact thermistor is detected for
500 msec continuously.
0004 An open circuit of the infrared
detecting thermistor inside the non-
contact thermistor is detected for
500 msec continuously.
0005 A short circuit of the infrared
detecting thermistor inside the non-
contact thermistor is detected for
500 msec continuously.
0006 While printing is under way, the
thermistor detects 150 deg C or less.
0007 While printing is under way, the
thermistor detects 140 deg C or less.
E012 The drum ITB motor is faulty.
0001 The ITB drum motor fails to
rotate.
The lock (normal state) signal is not
detected within 2 sec after the ITB
drum motor control signal has gone
ON or the motor speed has been
changed.
0002 The ITB drum motor fails to
rotate after it has rotated.
The lock (normal state) signal stops
0.5 sec later.
0003 The lock (normal state) signal
remains even when the ITB drum
motor has been stopped (i.e., the
lock (normal state) signal is
detected continuously for 2 sec after
the ITB drum motor control signal
has been turned OFF).
E020 There is a fault associated with the drum/developer.
For the first 2 digits of detail code xx12 through xxD0,
xx=01: Y
xx=02: M
xx=03: C
xx=04: Bk
Code Detail Description Timing of detection