Canon iR C3200 Series, Service Manual

Page: 891 / 1216

Chapter 16
16-117
16.3.8.2 0102 Jam Code
0004-9729
[ Case in the field ]
Field Remedy
0102 indicates that a delay jam is detected by the cassette 2 retry paper sensor (PS17).
1. Remove the paper pick-up ass'y and install a different one, and check whether the symptom can be corrected.
2. If the symptom can be corrected, replace the paper pick-up roller, the feed roller and the separation roller. If
the symptom cannot be corrected by these roller's replacement, replace the paper pick-up ass'y with a new one.
3. If the symptom cannot be corrected in the step 1, loosen the batch of paper loaded in the cassettes, or load a
new batch.
Paper pick-up roller: FB6-3405
Feed/separation roller: FB6-3407
Paper pick-up ass'y: FG6-9028
16.3.8.3 0105 Jam Code: Occurs with machine having mylar sheet to fixing/feeder
sensor flag
0002-3570
[ Inspected by Canon Inc. ]
Field Remedy
Check whether the mylar sheet is properly attached to the fixing/feeder sensor flag. If not, reattach it or replace
the sensor flag with a new one.
FB6-3143-020 Fixing/Feeder Sensor Flag (New type as of June 15, 2004)
16.3.8.4 JAM CODE 0107
0003-8653
[ Case in the field ]
Description
This jam code indicates a delay jam at the fixing delivery sensor (PS25).
Cause
There is a case in the field that the lock lever applying pressure to the ITB was broken at a portion where the
spring is hooked and the ITB did not rotate, resulting in a paper jam.
Field Remedy
Check whether the fixing delivery sensor (PS25) operates normally in service mode [COPIER>I/O>DC-
CON>P007>bit4]. If there is no problem, inspect whether the lock levers (front and rear) for the ITB are broken
at the spring hook portion. If any breakage is found, replace it with a new one (FB6-2965-000).