Canon iR C3200 Series, Service Manual

Page: 185 / 1216

Chapter 5
5-11
A:
1) Set '0' to the following: COPIER>FUNCTION>SYSTEM>CHK-TYPE.
2) Execute the following: COPIER>FUNCTION>SYSTEM>HD-CHECK*. (Make these selections, and press the
OK key.)
3) Turn off and then on the main power.
B:
1) By referring to the table "HDD Format," fill 'CHK-TYPE' under the following:
COPIER>FUNCTION>SYSTEM>CHK-TYPE.
2) Execute the following: COPIER>FUNCTION>SYSTEM>HD-CLEAR. (Make these selections, and press the OK key.)
3) Turn off and then on the main power.
C:
1) ** Start up in normal mode (i.e., turn on the main power while holding down the 1 and 7 keys); then, make the
following selections, and press the OK key: COPIER>FUNCTION>SYSTEM>DOWNLOAD.
2) Execute DOSDEV4 (formatting) using the SST.
3) Turn off and then on the main power.
11,21 The HDD has poor contact.
Action:
Turn off the main power. Check the 2 types of
cable (power, IDE) coming from the HDD;
then, turn the power back on.
At that time, check to see that the HDD rotates
and it is supplied with power.
13,25 There is a read error.
Action:
- if xxyy= 0713, 0725
Action:
- if xxyy = 0813, 0825
Action:
10,12,14,2
2,23,24
There is a system error or a packet data error.
Action:
xx Partition yy Description
D F
NG
A F
G
NG NG
A F C
NG NG
A F E
NG NG
F
B
NG