Canon iR C3200 Series, Service Manual, Page: 1000 / 1216

Chapter 17
17-20
0011 While the mew card reader is
starting up, an error occurs.
(Detection is normal before the
power has been turned off, but
detection fails when the power is
turned on.)
0012 While the new card reader is in
operation, an error occurs. (The
system assumes that IPC
communication cannot be restored.)
E731 There is a fault in the UFR board.
3000 The UFR board cannot be
recognized.
3001 The UFR board cannot be
initialized.
3002 The RAM bus cannot be
initialized.
3015 No image data arrives at the main
controller PCB.
E732 There is a reader communication error.
0000 The reader unit cannot be detected
at startup.
E733 There is a printer communication error.
0000 The printer unit cannot be detected
at startup.
0001 There is no response to an error
command from the printer unit.
E740 The Ethernet board is faulty.
0002 The MAC address is illegal.
E744 The language file is faulty.
0001 The version of the language file on
the HDD and the bootable version
differ.
0002 The size of the language file on the
HDD is too big.
0003 The language specified in
Config.txt on the HDD cannot be
found.
0004 A switchover to a language on the
HDD cannot be made.
Code Detail Description Timing of detection