Canon iR C1020 Series, Service Manual

Page: 378 / 408

Chapter 18
18-30
18.4.3 NUM
18.4.3.1 NUM List
0020-2022
T-18-39
18.4.4 NCU
18.4.4.1 NCU List
0020-2023
<TONE/ PULSE>
Operating Method
(1) Setting tone parameter
With "#NCU" displayed, press set key -> Press "#TONE/PULSE" set key
-> Pressing "#TONE" set key makes the setting mode for tone parameter.
(2) Setting pulse parameter
With "#NCU" displayed, press set key -> Press "#TONE/PULSE" set key.
-> Pressing "#PULSE" set key makes the setting mode for pulse parameter.
T-18-40
<DIAL TONE>
(1) Bit switch
Numeric parameter setting mode
Number Parameter Available setting range
02 RTN delivery condition X 1 to 99%
03 RTN delivery condition n 2 to 99 times
04 RTN delivery condition m 1 to 99 lines
05 NCC pause time (before ID code) 1 to 60 s
06 NCC pause time (after ID code) 1 to 60 s
10 T.30 T0 timer Generally 55s
11 T.30 T1 timer (for receiving) 0 to 9999 (France = 3500, Others = 3000)
12 Maximum number of receiving lines 0 to 65535 (lines) Unlimited for 0
13 T.30 EOL timer 500 to 3000 (Default: 55s)
15 Threshold for hooking and on-hook 0 to 999
16 Time to temporarily response at FAX/TEL switching 0 to 9
17 Pseudo RBT cadence ON time 0 to 999
18 Pseudo RBT cadence OFF time (short) 0 to 999
19 Pseudo RBT cadence OFF time (long) 0 to 999
20 Pseudo ring tone cadence ON time 0 to 999
21 Pseudo CI cadence OFF time (short) 0 to 999
22 Pseudo CI cadence OFF time (long) 0 to 999
23 CNG detection level at FAX/TEL switching 0 to 7
24 Pseudo RBT delivery level at FAX/TEL switching 10 to 20 (100V),
0 to 20 (120/ 230V)
25 CNG monitoring time when answer phone is used 0 to 999
26 Level to detect no-sound when answer phone is used 0 to 7
27 Preamble detection time of V21 low-speed flag 20 (* 10ms)
51 Threshold value of hook detection 10 to
53 Set the number of DTMF ringing times at FAX remote reception 10 to (Default: 25)
54 Set the transmission time of BusyTone when the handset is used
55 Cycle to obtain data of environment log 0 to 480 min (Default: 60min) (No data is obtained with 0)
56 Select counter type to be displayed at counter 1 101
57 Select counter type to be displayed at counter 2 0 to 999
58 Select counter type to be displayed at counter 3 0 to 999
59 Select counter type to be displayed at counter 4 0 to 999
60 Select counter type to be displayed at counter 5 0 to 999
61 Select counter type to be displayed at counter 6 0 to 999
74 Port number of e-RDS RGW
75 Transmission interval of e-RDS for 3rd party
Item Function Setting Range
TONE 01 Tone signal delivery time (PSTN) 10 to 9999 (ms)
02 Minimum pause time (PSTN) 10 to 9999 (ms)
PULSE PULSE FORM Pulse digit format 0 -> DP (N)
1 -> DP (N + 1)
2 -> DP (10 - N)
01 Pulse dial speed (10 pps) 5 to 300 (x 0.1 pps)
03 Pulse dial make ratio 10 to 90 (%)
04 Minimum pause time 10 to 9999 (ms)