Specifying IP Addresses
2-33
Co
nn
e
c
tin
g
th
e Ma
ch
in
e
to
a TC
P/IP
Ne
twor
k
2
Checking the Network Connection
After specifying IP addresses, make sure that the network connections are properly
set.
IMPORTANT
•
When you connect the machine to a switching hub, the machine may not be able to
connect to the network even if the network settings are correctly set. This problem may
be resolved by delaying the startup of network communications for the machine. (See
“Startup Time Settings,” on p. 3-9.)
•
If you set the startup time of the machine’s network function, execute the PING command
after the time set as the startup time passes. (See “Startup Time Settings,” on p. 3-9.)
1
Press
(Additional Functions)
➞
use [
] or [
] to select
<System Settings>
➞
press [OK].
For help, see the screen shots in steps 1 and 2 in “Ethernet Driver,” on p. 2-2.
2
Use [
] or [
] to select
<Network Settings>
➞
press [OK].
3
Use [
] or [
] to select
<TCP/IP Settings>
➞
press [OK].
4
Use [
] or [
] to select
<IPv4 Settings> or
<IPv6 Settings>
➞
press [OK].
Device Info Settings
Dept. ID Management
User ID Management
Network Settings
System Settings
TCP/IP Settings
SNMP Settings
Ethernet Driver
Startup Time Set.
Network Settings
IPv4 Settings
IPv6 Settings
WINS Configuration
LPD Print Settings
TCP/IP Settings
Summary of Contents for IR 2420
Page 2: ...imageRUNNER 2422 2420 Network Guide ...
Page 17: ...TCP IP Network Setup Operating Procedures 1 6 Before You Start Using This Machine 1 ...
Page 87: ...Machine Management 3 20 Setting Up the Machine for Your Network Environment 3 ...
Page 97: ...Printing Problems and Remedies 5 4 Troubleshooting 5 ...
