Specifying IP Addresses
2-30
Co
nn
e
c
tin
g
th
e Ma
ch
in
e
to
a TC
P/IP
Ne
twor
k
2
13
Set the DNS Dynamic Update function.
●
If you are setting up the machine for an IPv4 network:
IMPORTANT
•
The DNS dynamic update function enables the machine to register the IP address,
host name, and domain name of the machine to the DNS server automatically. This
function requires that a dynamic DNS server be available in the network.
•
To use the DNS dynamic update function, enter the IP address of a DNS server, the
host name, and domain name of this machine.
NOTE
•
If you have a DHCP server running Windows 2000 Server that uses the DHCP
service and want to register the machine’s DNS record, configure the following
settings in the DHCP server:
- Under the DHCP server, right-click the [Scope] icon
➞
click [Properties]. In the
[DNS] sheet of the displayed dialog box, select [Automatically update DHCP client
information in DNS]
➞
[Update DNS only if DHCP client requests].
•
If you have a DHCP server running Windows Server 2003 or Windows Server 2008
that uses the DHCP service and want to register the machine’s DNS record,
configure the following settings in the DHCP server:
- Under the DHCP server, right-click the [Scope] icon
➞
click [Properties]. In the
[DNS] sheet of the displayed dialog box, select [Enable DNS dynamic updates
according to the settings below]
➞
[Dynamically update DNS A and PTR records
only if requested by the DHCP clients].
❑
Use [
] or [
] to select <On>
➞
press
[OK].
If you do not want to use the DNS Dynamic
Update function, select ‘Off’.
Off
On
DNS Dynamic Update
Summary of Contents for IR 2420
Page 2: ...imageRUNNER 2422 2420 Network Guide ...
Page 17: ...TCP IP Network Setup Operating Procedures 1 6 Before You Start Using This Machine 1 ...
Page 87: ...Machine Management 3 20 Setting Up the Machine for Your Network Environment 3 ...
Page 97: ...Printing Problems and Remedies 5 4 Troubleshooting 5 ...
