Canon iPR C7010VP Series, Installation Manual

Page: 134 / 157

Chapter 2
2-89
F-2-376
5) Remove the gear cover [1].
- 1 screw [2]
F-2-377
6) Move the harness [1] to the top of the deck lifter motor unit [2].
F-2-378
7) Remove the deck lifter motor unit [1].
- 4 screws [2]
F-2-379
2.2.2 Middle Deck Unit
2.2.2.1 Middle Deck Unit
0026-5006
imagePRESS C6010 / im agePRESS C7010VP / imagePRESS C60 10VP /
imagePRESS C7010VP FS / image PRESS C7010VP PSU / imagePRE SS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
F-2-380
T-2-3
1) Remove the middle deck unit.
[1] [2]
[1] [2]
[1]
CAUTION:
After replacing the deck lifter motor unit, be sure not to forget to remove the
screwdriver that keeps the tension of the lifter wire.
If the screwdriver is difficult to remove, move the lifter drive shaft in the
backlash of the gear with the driver.
No. Name of part Qty.
[1] Middle deck lifter motor (M703) 1
[2] [2]
[1]
[2]
[1]
[2]
[1]