Canon iPR C7010VP Series, Installation Manual

Page: 107 / 157

Chapter 2
2-62
- 1 belt [6]
- 1 E-ring [7]
- 1 pulley [8]
- 2 dowel pins [9]
- 1 E-ring [10]
- 1 bearing [11]
F-2-276
3-2. Removing the duplexing feed roller 6-1
1) Remove the TP screw [2] securing the flapper stay [1], and move the du-
plexing attachment plate (left) [3] in the direction of the arrow.
- Harness (1 edge saddle [4])
- 2 binding screws [5]
F-2-277
2) Detach the protection plate [1].
- 2 screws [2]
F-2-278
3) Remove the duplexing feed roller 6-2 [1].
- Front side
- 2 E-rings [2]
- 2 pulleys [3]
- 1 belt [4]
- 2 dowel pins [5]
- 1 E-ring [6]
- 1 bearing [7]
- Rear side
- 1 belt [8]
- 1 E-ring [9]
- 1 pulley [10]
- 1 dowel pin [11]
- 1 screw [12]
- 1 bushing (w/leaf spring) [13]
- 1 E-ring [14]
- 1 bearing [15]
F-2-279
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
[1]
[6]
[5]
[4]
[3]
[2]
[11]
[10]
[9]
[8]
[7]
[2] [1] [5]
[4]
[5] [3]
[1]
[2]
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
[1]
[8]
[4]
[15]
[14]
[13]
[12]
[11]
[10]
[9]
[7]
[6]
[5]
[3]
[2]
[3]
[2]
[5]