Canon iPR C7010VP Series, Installation Manual

Page: 105 / 157

Chapter 2
2-60
2.1.7.7 Right Pull-Out Roller Unit (9 million prints)
0026-4852 imagePRESS C6010 / imagePRESS C7010VP / imag ePRESS C6010VP /
imagePRESS C7010VP FS / imageP RESS C7010VP PSU / imagePRESS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
1. Parts to replace
- Secondary pull-out roller (FC8-1659)
2. Before the replacement
1) Remove the Vertical Path Unit. Refer to "Chapter 8 Removing the Verti-
cal Path Unit" in the Service Manual.
2) Pull out the Right De ck Unit. Refer to "Chapter 8 Pulling out the D eck
Unit" in the Service Manual.
3. Replacement procedure
1) Remove the Main Station Inner Right Lower Cover [1].
- 1 Screw [2]
F-2-267
2) Remove the Main Station Front Right Lower Cover [1].
- 2 Screws [2]
F-2-268
3) Remove the belt [1].
- 2 E-rings [2]
- 1 gear [3]
- 1 dowel pin [4]
- 1 bushing [5]
F-2-269
4) Remove the gear unit [1].
- 1 E-ring [2]
F-2-270
5) Remove the right pull-out roller unit [1].
- 5 screws [2]
F-2-271
[1] [A]
[1]
[2]
[2]
[3]
[4]
[5]
[1] [2]
[1] [2]
[2]
[2]